IDEAL-TEK 高精密反向型镊子 2AX.SA 货号：2AX.SA 品牌：

发表于由

IDEAL-TEK 高精密反向型镊子 2AX.SA

货号：2AX.SA

规格：把

品牌： Jinpan

报价：￥280.00

商品描述

高精密顶级镊子：手工打造完美的尖头，对称度及平衡度均一流，无擦伤/表面完美无暇，Ideal-tek 亦不断致力于开发及研究，以求达到每支镊子都能帮助每位客户灵活生产。

Ideal-tek致力于研究和开发新手动工具的解决方案,以满足顾客的各种塲合的应用及要求。其生产的镊子及剪钳以完美的质量,齐全的规格和新颖的设计,在业界享负盛名。Ideal-tek的产品销往世界各地，主要应用于电子工业、制表业、珠宝业、显微外科学、显微镜业、光学、宇宙航空工业等行业。
 

General Notes

  • low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
  • contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements
  • non-magnetizable
  • good corrosion resistance to most chemicals, salts and acids
  • generally used where corrosion resistance and toughness are primary requirements
  • typical applications include tweezers for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments

Composition

Component Wt.% Component Wt.% Component Wt.%
C ≤0.03 Si ≤1.0 Mn ≤2.0
P ≤0.045 S ≤0.03 Cr 17.0-19.0
Mo 2.5-3.0 Ni 12.5-15.0    

Mechanical properties:

State annealed
Density 8.0 g/cm³
hardness HB30 ≤215
Hardness Rockwell B 79
Tensile strength, ultimate 500-700 MPa
Tensile strength, yield 290
0.2% Yield stress ≤200 MPa
Elongation, break 40%
Modulus of elasticity 200 GPa

Thermal properties

Coef. of lin. therm expansion 16.0 E-6/°C 20°C-100°C
Coef. of lin. therm expansion 17.0 E-6/°C 20°C-300°C
Specific heat capacity: 0.50 J/(g·K)  
Thermal conductivity: 15W/(m·K)  
Continuos use temperature: 350°C  
Max service temperature, ait 925°C  

Electrical properties

Resistivity 0.75 E-4 Ohm.cm